| Phone |
| |
| |
| 대표전화 |
1577-7956 |
| 본 사 |
031-457-9187 |
| 대 전 |
042-932-1265 |
| |
|
| Web Site Visitors |
| |
| |
| Today |
495 |
| Yesterday |
624 |
| Since 2006 |
1,761,084 |
| |
|
|
|
| KINEMATICA Homogenizer 는 크게 |
| [1] 모터인 Drive Unit |
| [2] Shaft 와 Generator 를 포함하는 Tool 부분인 Dispersing Aggregates 로 구분됩니다. |
| |
[1] Drive 본체는 다음과 같은 종류가 있으며 각 Drive 본체의 개괄적인 특징과 Catalog Number 는 다음과 같습니다.
Ø Generator 와 Standard Shaft Length 는 각 Drive Unit 와 함께 사용가능한 Dispersing Aggregates 의
수치를 의미합니다. |
| Model / Series |
Volume |
Max. Speed |
Ø Generator |
Standard Shaft Length |
| PT 1200 E |
0.05 - 250ml |
28,000rpm |
3 - 12 mm |
50 - 123 mm |
| PT 1300 D |
0.05 - 250ml |
30,000rpm |
3 - 12 mm |
50 - 123 mm |
| PT 2500 E |
0.05 - 2000ml |
30,000rpm |
3 - 25 mm |
50 - 170 mm |
| PT 4000 |
0.05 - 2000ml |
40,000rpm |
3 - 25 mm |
50 - 170 mm |
| PT 10-35 GT |
0.1 - 10,000ml |
30,000rpm |
5 - 36 mm |
78 - 250 mm |
| PT 3100 D |
0.1 - 10,000ml |
30,000rpm |
5 - 36 mm |
78 - 250 mm |
| PT 6100 D |
up to 30 Liter |
24,000rpm |
36 - 60 mm |
250 mm |
| [2] Dispersing Aggregates 의 Catalog Number 소개 |
| [예] PT-DA 12 /2 M EC - D 148 |
| |
| PT-DA |
POLYTRON® Dispersing Aggregate |
| |
| 12 |
| Diameter of the stator resp. dispersing generator in mm. |
| up to a diameter of 20 mm the stator tube and the stator of the dispersing generator are made of one piece
and the stator is equipped with saw teeth and safety ring as standard |
|
| |
| /2 |
| Number of teeth rows of rotor and stator |
| ../2 = rotor and stator with one teeth row each |
| ../4 = rotor and stator with two teeth row each |
| ../6 = rotor and stator with three teeth row each |
|
| |
| M |
| Special design regarding rotor or stator |
| M = rotor with kinves for precutting |
| W = W generator for fibrous and stringy materials |
| Z = Z generator for hard and brittle material |
| B = BIOTRONA® generator : high turbulances, low sheer forces |
|
| |
| EC |
| Design of sfaht / stator tube |
| EC = Easy Clean design, easy dissembly, sterilizable |
| S = Stator tube with slots |
| T = Stator tube with only one hole for less air introduction |
| G = Stator tube with mechanical seal for vacuum / pressure applications |
|
| |
| D |
| Type of coupling / suitable drive system |
| A = PT-K / PT-G (PT 10-35 / PT 45-80) ** |
| B = PT3100 / PT 6100 |
| C = PT 1200 C, CL, B |
| D = PT 2100 |
| E = PT 1200 E, PT 1300 D, PT 1600 E, PT 4000 |
| F = PT 10-35 GT, PT 3100 D, PT 7100 * |
| * Dispersing Aggregates for B-coupling can aslo be connected to the F-coupling |
| ** by using PTA-PT-DA Adapter Dispersing Aggregates for A-Coupling can also be connected to B- or F-Coupling |
|
| |
| 148 |
Length of shaft / stator tube in mm |
|
