|
| Specifications |
OmniaLabDS 20 |
OmniaLabDS 40 |
OmniaLabDS 60 |
|
| Pure water values type II + CLRW (CLSI) + DIN EN 285 + ISO EN 15883 |
|
| Pure water performance at 15 °C [l/h] |
20 |
40 |
60 |
|
| Conductivity [μS/cm] |
0.1 up to 1.0 |
0.1 up to 1.0 |
0.1 up to 1.0 |
|
| Resistance at 25 °C [MΩ x cm]
| 10 up to 1 |
10 up to 1 |
10 up to 1 |
|
| Dispensing performance [l/min.] |
up to 2 |
up to 2 |
up to 2 |
|
| Particles* [1/ml] |
< 1 |
< 1 |
< 1 |
|
| Bacteria* [CFU/ml] |
< 0.01 |
< 0.01 |
< 0.01 |
|
| Pure Water Tank Pressurized Outlet
| 100 l/h - 2 bar |
100 l/h - 2 bar |
100 l/h - 2 bar |
|
| * With sterile filter capsule 0.2 μm |
|
| Feedwater requirements |
|
|
| Tap water according to DIN 2000 |
|
| Feedwater pressure [bar] |
1 up to 6 |
1 up to 6 |
1 up to 6 |
|
| Conductivity at 25 °C [μS/cm] |
< 2000* |
< 2000* |
< 2000* |
|
| Colloid index SDI |
< 5** |
< 5** |
< 5** |
|
| Dissolved CO₂ [ppm] |
< 30 |
< 30 |
< 30 |
|
| Free chlorine [ppm] |
< 0.1 |
< 0.1 |
< 0.1 |
|
| TOC-value [ppb] |
< 2 |
< 2 |
< 2 |
|
| Hardness [as CaCO3] [ppm] |
< 300 |
< 300 |
< 300 |
|
| Iron/manganese [mg/l] |
< 0.05 |
< 0.05 |
< 0.05 |
|
| pH range |
4 up to 10 |
4 up to 10 |
4 up to 10 |
|
* Feed water with high conductivity can reduce the service life of the cartridges and increase the conductivity of type III water.
If the conductivity is between 800 and 2000 μS/cm, we recommend using a water softener
** With an SDI/FI between 3 and 5, pre-treatment must be used |
|
| Technical data |
|
|
| Feedwater connection |
R3/4 inch |
R3/4 inch |
R3/4 inch |
|
| Electrical connection [Volt/Hz] |
90 - 240/50 - 60 |
90 - 240/50 - 60 |
90 - 240/50 - 60 |
|
| Connected load [W] |
0.1 |
0.1 |
0.1 |
|
| Ambient temperature [°C] |
4 up to 40 (Recommendation: 10 up to 25) |
|
| Dimensions Tower* [WxHxD mm] |
511 x 1520 x 575 |
511 x 1520 x 575 |
511 x 1520 x 575 |
|
| Dimensions Base cabinet tank [WxHxD mm] |
511 x 800 x 575 |
511 x 800 x 575 |
511 x 800 x 575 |
|
| Weight [kg] |
39 |
38 |
40 |
|
| * With OptiFill Dispenser |
