|
| Specifications |
OmniaLabUP 20 |
OmniaLabUP 40 |
|
| Pure water values type II |
|
|
| Pure water performance at 15 °C [l/h] |
20 |
40 |
|
| Conductivity [μS/cm] |
0.067 up to 0.1 |
0.067 up to 0.1 |
|
| Resistance at 25 °C [MΩ x cm]
| 15 up to 10 |
15 up to 10 |
|
| Dispensing performance [l/min.] |
up to 2 |
up to 2 |
|
| Individually adjustable dispensing volume [L] |
0.05 up to 25 |
0.05 up to 25 |
|
| Particles** < 0.2 μm [1/ml] |
< 1 |
< 1 |
|
| Bacteria** [CFU/ml] |
< 0.01 |
< 0.01 |
|
| Pressure Outlet Pure Water Tank
| 100 l/h - 2 bar |
100 l/h - 2 bar |
|
| ** With sterile filter capsule 0.2 μm |
|
| Feedwater requirements |
|
|
| Tap water according to DIN 2000 |
|
| Feedwater pressure [bar] |
1 up to 6 |
1 up to 6 |
|
| Conductivity at 25 °C [μS/cm] |
< 2000* |
< 2000* |
|
| Colloid index SDI |
< 5** |
< 5** |
|
| Dissolved CO₂ [ppm] |
< 30 |
< 30 |
|
| Free chlorine [ppm] |
< 0.1 |
< 0.1 |
|
| TOC-value [ppb] |
< 2 |
< 2 |
|
| Hardness [as CaCO3] [ppm] |
< 300 |
< 300 |
|
| Iron/manganese [mg/l] |
< 0.05 |
< 0.05 |
|
| Silica [ppm] |
< 30 |
< 30 |
|
| pH range |
4 up to 10 |
4 up to 10 |
|
* Feed water with high conductivity can reduce the service life of the cartridges and increase the conductivity of type III water.
If the conductivity is between 800 and 2000 μS/cm, we recommend using a water softener
** With an SDI/FI between 3 and 5, pre-treatment must be used |
|
| Technical data |
|
|
| Feedwater connection |
R3/4 inch |
R3/4 inch |
|
| Electrical connection [Volt/Hz] |
90 - 240/50 - 60 |
90 - 240/50 - 60 |
|
| Connected load [W] |
0.1 |
0.1 |
|
| Ambient temperature [°C] |
4 up to 40 (Recommendation: 10 up to 25) |
|
| Dimensions Tower* [WxHxD mm] |
511 x 1520 x 575 |
511 x 1520 x 575 |
|
| Dimensions Base cabinet tank* [WxHxD mm] |
511 x 800 x 575 |
511 x 800 x 575 |
|
| Weight [kg] |
40 |
40 |
|
| * With OptiFill Dispenser |
